How to place, remove and replace your decals. Please note that our wall decals are for interior use only.
Step 1. Prepare the wall.
Make sure the wall or material you’re sticking the decal to, is free of dust or other loose elements. Our wall decals stick to almost all flat surfaces.
If you’re adding a large decal or multiple decals, now is a good time to measure and see if they will fit.
Step 2. Peel the decal.
Take the decal from the sheet. It is frontslit and should come off easy. Bent a corner of the sheet. Be careful with very small or fragile elements of the decal.
Step 3. Stick the decal to the surface.
Our designs are made using geometric shapes and along certain angles. For the nicest result you should stick the decals in a 0, 45 or 90-degree angle.
It is often easiest to start with the bottom of the decal.
Step 4. Peel and adjust if necessary.
If the decal is not placed to your liking, you can peel it off and stick it again. Be careful for small and fragile elements of the decal when peeling it from the wall.
Removing a wall decal.
The material used for our wall decals will strengthen its bond with the wall over time. If you want to remove or replace the decal, but are having a hard time peeling it from the surface, you can use a blow-dryer. Heat up the decal for a little while and it will come off easily. Wait until it is cooled down before sticking again.